Shortened elbow bend

The shortened elbow bend is a formed part designed for changing the direction of the pipe-line. It is installed in the places with limited space.

Outer diameter and minimum thickness of steel pipe wall* d, mm	Angle of elbow bend
	PE mantle						Gal mantle
	Type 1			Type 2			D, mm	L, mm
	R, mm	D, mm	L, mm	D, mm	L, mm	m, kg	D, mm	L, mm
3D (R=1,5DN)
32 х 3,0	38	125	605	-	605	3	140	605
38 х 3,0	48	125	605	-	605	3	140	605
45 х 3,0	60	125	605	-	605	4	140	605
57 х 3,0	75	125	605	140	605	4	140	605
76 х 3,0	100	140	620	160	620	4	160	620
89 х 4,0	120	160	640	180	640	7	180	640
108 х 4,0	150	180	656	200	656	10	200	656
133 х 4,0	190	225	685	250	685	17	225	685
159 х 4,5	225	250	710	280	710	25	250	710
219 х 6,0	300	315	755	355	755	56	315	755
273 х 7,0	375	400	800	450	800	97	400	800
325 х 7,0	450	450	850	560	850	120	450	850
426 х 7,0	600	560	900	630	900	233	560	900
2D (R=DN)
530 х 7,0	500	710	900	-	-	251	675	900
630 х 8,0	600	800	1000	-	-	403	775	1200
720 х 8,0	700	900	1100	-	-	436	875	1100
820 х 9,0	800	1000	1220	1100	1220	713	975	1220
920 х 10,0	900	1100	1300	1200	1300	847	1075	1300
1020 х 11,0	1000	1200	1455	1200	1455	1024	1175	1455

An example of the type codes in the ordered specification:

The shortened steel elbow bend of diameter 57 mm, with thickness of pipe wall 3 mm, 90°, with isolation from polyurethane foam,in type 1,in polyethylene casing:

Elbow bend St57*3-90°-1-PUF-PEM-Sh

The shortened steel elbow bend of diameter 57 mm, with thickness of pipe wall 3 mm, 90°, with isolation from polyurethane foam, , in galvanized casing:

Elbow bend St57*3-90°-PUF-GalM-Sh

Notes:

The steel part of the elbow bend can be made undivided and bent from a pipe or welded with a return or segmented bend. The thickness of the wall of the steel return or segmented bends are accepted according to the National State Standard 17375-2001, Standard 30753-2001, standard series 5.903-13 for the thickness of the main pipe. The standard sizes of produced elbow bends are shown in the table. At the request of the customer, the elbow bends can be made with different angles α. It is possible to produce elbow bends from flat steel. It is possible to produce elbow bends with increased length of arms and thickness of walls.

You are here

Shortened elbow bend